Skip to content

Plant Process Solution

All Atritor plants include an air-swept unit and material is conveyed through the system in an air stream.

All Atritor plants include an air-swept unit, where material is conveyed through the system in an air stream.

Feed material is metered into the inlet air stream using a variety of variable speed devices depending on material character. After the process operation the finished product is discharged from the drying milling unit and carried in the air stream to a cyclone and / or reverse jet bag filter.

Plant process solution diagram
Atritor Plant Diagram

Mill / Dryer solutions

Cell Mill

  • Simultaneously dries and mills to a super fine powder with tightly controlled particle size distributions
  • Capacities range from 50kg/h to 15t/h
  • Inlet temperature up to 400°C, outlet temperature to suit final product moisture
  • Evaporative rates up to 3,000kg/h
  • Slurry injection, classification, coating, surface modification and hygienic options available

Dryer-Pulveriser

  • Simultaneously dries and mills minerals, chemical and filter cakes
  • Capacity range 50kg/h to 20t/h
  • Inlet temperature up to 500°C, outlet temperature to suit final product moisture
  • Evaporative rates up to 4,000kg/h

AST Dryer

  • Excellent for producing relatively coarse products at high capacities
  • Inlet air temperature up to 600°C, outlet temperature to suit final product moisture
  • Suitable for feeds of high residual moisture
  • Evaporative rates up to 7,000kg/h
Atritor AST Dryer in position
Dryer Pulveriser
Atritor Cell Mill side view

Want to know more details about our Plant Process Solution